Unsaturated Polyester Resin AP7016
    
بازدید: 3489
    

AP7016 is a modified isophthalic acid based resin designed to provide exceptional resistance to solvents and chemicals. This resin offers a good retention of mechanical properties at elevated temperatures. This resin is dissolved in styrene.

Applications and Fabrication Techniques

. Recommended for most commercial FRP fabrication processes such as: hand layup, spray-up, pultrusion, filament winding and resin transfer molding, SMC & BMC

. Suitable for applications where outstanding mechanical properties and excellent

. To make parts that need chemical and heat resistance

. For manufacturing pipes and tanks


مشخصه میزان واحد
Colour <2 gardner
Density, 25°C/77°F 1.08 ± 0.04 g/cm3
Dynamic Viscosity, 25°C/77°F 300-600 cP
Styrene Content 35-41 %
Acid Value Max 20 mg KOH/g
Shelf Life, Dark, 25°C/77°F 6 months
  • Typical properties are not to be construed as specifications.
عنوان وزن
Resin Temperature 25°C/77°F
Catalyst 1 (phr)(2)
Cobalt octoate1% 1 (phr)
Gel Time (min.) 14-20 (3)
مشخصه میزان واحد استاندارد روش آزمون
Tensile Strength (MPa) Min. 75.0 ASTM D 638
Tensile Elongation (%) Min. 3.5 ASTM D 638
Tensile Modulus (GPa) Min. 3.0 ASTM D 638
Flexural Strength (MPa) Min. 120.0 ASTM D 790
Flexural Modulus (GPa) Min. 3.5 ASTM D 790
Heat Distortion Temperature (6) °C Min. 88.0 ASTM D 648 /ISO 75
Barcol Hardness (7) Min. 40.0 ASTM D 2583

Typical Properties (4) of Post cured (5) Resin Clear Casting:

Typical property values only, not to be construed as specifications.

Cure schedule: 24 hours at room temperature; 3 hours at 85°C (185°F)

Maximum stress: 1.8 MPa.

Test specimen must be prepared by mold.

Handling and Storage Consideration:

This resin should be stored indoors in the original, unopened and undamaged packaging, in a dry place at temperatures between 5°C and 30°C. The shelf life of styrene containing unsaturated polyester resins will be significantly reduced when exposed to light and/or higher temperatures.

Safety:

This resin contains ingredients which could be harmful if mishandled. Contact with skin and eyes should be avoided and necessary protective equipment and clothing should be worn.



  نظرات
دیدگاه های ارسال شده توسط شما، پس از تایید مدیر سایت در وب سایت منتشر خواهد شد.
پیام هایی که حاوی تهمت یا افترا باشد منتشر نخواهد شد.
پیام هایی که به غیر از زبان فارسی یا غیر مرتبط با خبر باشد منتشر نخواهد شد.